亚洲 日韩 国产 制服 在线

  • <dd id="5vmvy"><pre id="5vmvy"></pre></dd>
    <s id="5vmvy"><object id="5vmvy"></object></s>
    1. <th id="5vmvy"><track id="5vmvy"><rt id="5vmvy"></rt></track></th>

      
      <dd id="5vmvy"><pre id="5vmvy"></pre></dd>

    2. 2005 OKUMA HOWA 2SP-25HG CNC TWIN SPINDLE TURNING CENTER WITH OVERHEAD GANTRY LOADER UNIT AND TURN-AROUND STATION CHIP CONVEYOR AND ALL TOOL HOLDERS AND OPTIONS
        2005 Okuma Howa 2SP-25HG Full Front
       2005 Okuma Howa 2SP-25HG Full Work Area
       2005 Okuma Howa 2SP-25HG Left Work Area
      2005 Okuma Howa 2SP-25HG Right Side Workarea
        2005 Okuma Howa 2SP-25HG Gantry Side Rear View
       2005 Okuma Howa 2SP-25HG Gantry View
       2005 Okuma Howa 2SP-25HG Fanuc Control Full View
        2005 Okuma Howa 2SP-25HG Fanuc Cutting Hours View
       Okuma-Howa 2SP-25H-Main-Casting
        Okuma-Howa 2SP-25HG Design Features
        Okuma-Howa 2SP-25H-2SP-35H Specs
      Description:
      2005 OKUMA HOWA 2SP-25HG CNC TWIN SPINDLE TURNING CENTER WITH OVERHEAD GANTRY LOADER UNIT AND TURN-AROUND STATION CHIP CONVEYOR AND ALL TOOL HOLDERS AND OPTIONS
      Specifications:
      2005 OKUMA HOWA 2SP-25HG CNC TWIN SPINDLE TURNING CENTER WITH OVERHEAD GANTRY LOADER UNIT AND TURN-AROUND STATION CHIP CONVEYOR AND ALL TOOL HOLDERS AND OPTIONS: MAIN SPECIFICATIONS: MAXIMUM CUTTING DIAMETER.......... 13.78" MAXIMUM CUTTING LENGTH.............. 7.87" DISTANCE BETWEEN SPINDLES......? 15.75" SPINDLE CENTER FROM FLOOR.......... 47.44" SPINDLE MOTORS: (FANUC ALPHA 16/6000 X 2 -25 HP) SPINDLE SPEED RANGE.........45-4500 RPM WORKHOLDIND:...................10" 3- Jaw Chucks SPINDLE NOSE.....................A2-6 DRAWTUBE HOLE DIA......?..2.44" FRONT BEARING DIAMETER...3.94" MAX WEIGHT ON SPINDLE W/CHUCK...242 LBS AXIS DRIVES: X AXIS TRAVEL......................6.89" Z AXIS TRAVEL......................8.27" X AXIS THRUST & Z AXIS THRUST 1,543 / 1,708 FT/LBS X - Z AXIS BALLSCREW DIAMETER........1.10" X - Z AXIS RAPID TRAVERSE RATE.........945 IPM FEEDRATES................... 0.0001 - 5.24 IPR COOLING SYSTEM FOR BALLSCREW FORCED OIL TURRETS: (FANUC ALPHA 6/2000 MOTOR)........... V10 + V10 CURVIC COUPLING DIAMETER..............6.61" CLAMPING FORCE................................ 6,173 LBS INDEXING TIME(TOOL-TOOL)............... 0.2 SEC. STANDARD TOOL SIZE.......................... 1.0" X 1.0" MAXIMUM BORING BAR SIZE.............. 1.75" OD MACHINE SIZE & MASS: HEIGHT.................................................126" FLOOR SPACE REQ................................113.4" X 161.5" WEIGHT................................................15,400 LBS With Gantry & Options CNC LOADER INFORMATION: 3-AXIS SINGLE ARM CNC GANTRY LOADER WITH X AXIS REPEATABILITY.......+-0.0001" Z AXIS POSITIONING ........+- 0.0009" / 11.81" Z AXIS REPEATABILITY.......+-0.0002" MAX 4,724 IPM, 2-3 JAW LOADER UNITS WITH HEAD TURN-AROUND STATION 2-CHUCKS, TWO ACTUATORS. WORKPIECE MAXIMUMS WITH THE LOADER DIAMETER..........8.50" LENGTH.........................................4.72" MAX 1 PART WEIGHT.......................17.6.LBS LOADER SPEEDS / TIMES: LONGITUDINAL (L/R) A AXIS............4724 IPM A AXIS STROKE...............................77.17" VERTICAL B-AXIS.............................4724 IPM B-AXIS STROKE...............................33.46" HORIZONTAL (IN/OUT) LOADER C AXIS 1575 IPM C AXIS STROKE..................?.........11.02" LOADING TIME............................... 8 SECONDS MINIMUM CYCLE TIME................ 35 SECONDS LOADER AND TURNOVER CHUCKS: JAW STROKE................................1.26" ACTUATION METHOD.................... FORCED AIR EQUIPPED WITH THE FOLLOWING: AUTOMATIC GANTRY LOADER PENDANT WITH FANUC 18iT-B CNC CONTROL HEAVY-DUTY SIDE DISCHARGE CHIP CONVEYOR COOLANT TANKS (2) 10?3-JAW CHUCKS CHUCKS INSTALLED. ALL AVAILABLE BOOKS AND MANUALS SPECIAL REDUCED PRICE. $ Neg.on Timing to Move! Machine Gantry Loader and Spindle Turret Operation Video Links! http://tbf.me/a/BZGjtK
      Price:
      亚洲 日韩 国产 制服 在线
    3. <dd id="5vmvy"><pre id="5vmvy"></pre></dd>
      <s id="5vmvy"><object id="5vmvy"></object></s>
      1. <th id="5vmvy"><track id="5vmvy"><rt id="5vmvy"></rt></track></th>

        
        <dd id="5vmvy"><pre id="5vmvy"></pre></dd>